VAPORESSO REVENGER X 220W Touch Screen with 5ml NRG Tank
Revenger X, a new member to the Vaporesso Revenger Family, is so immersive that the device itself disappears into the experience. The mechanical buttons now give way to highly responsive touch buttons, bringing out the more integrated look of the IML interface. Built with OMNI Board 2.2, in additional to all the advanced settings and output modes, it now has a more friendly UI, easier to navigate for all vapers. Equipped with NRG tank improved, you will be rest assured enjoying the flavor and vapor out of the variety of GT cores available.
Size: 45mm x 89mm x 28mm
Display: 0.96inch OLED
Brightness: 16 tier adjustment
Button: One physical fire button, three responsive touch button
Haptic Pattern: Mobile-specific vibration adjustment
Startup Speed: <0.1S
Temperature Control Range: 100°C-315°C/200°F-600°F
Output Modes: VW(H/N/S), CCW, CCT, VT(NI, TI, SS), TCR(M1, M2), RTC, BYPASS
Battery Type: Dual 18650 battery
1. Immersive and more integrated look with responsive touch buttons
2. Built with OMNI Board 2.2 with more friendly UI
3. Slide-n-fill design tank, easier to refill
4. Powered by dual 18650 batteries, with a maximum output of 220W
5. Heating insulation layer on the bottom gives safer and relaxing vaping experience
Packing List （5ml）:
1 x Revenger X Mod
1 x NRG Tank(5ml)
1 x GT4 Core (Pre-installed)
1 x GT8 0.15Ω
1 x Replacement Glass Tube
1 x Vaporesso USB Cable
1 x User Manual
Switch on/off: Press the fire button 5 times in quick succession within 2 seconds, it will be powered on/off.
Vaping: Hold the fire button and inhale. Release the fire button and exhale.
Automatic atomizer recognition: The mod will read the coil’s resistance as soon as the connection is detected. It will also recognize the coil type. When a kanthal coil is used, the mode will shift from TC mode to wattage mode automatically.
Adjustment button lock/unlock: Keep pressing mode button and up button simultaneously for 2 seconds when the device is powered on, then the up and down buttons will be locked and the screen will display “SYSTEM LOCKED”. It can be unlocked in the same way.
Switch the modes: Long press the mode button for 3 seconds to switch among VW/VT/TCR/BYPASS/CCT/CCW modes.
Atomizer replacement: Twist open the mouthpiece base counter clockwise and then remove the top lid. Take the atomizer out and replace with a new one. Make sure that the atomizer is secured in place with the slot fits onto the inside opening. Twist back the top lid and screw back the mouthpiece.
E-juice filling: Twist open the mouthpiece counterclockwise and remove the top lid. Inject the liquid directly into the chamber on the side. Once filled, twist back the top lid and screw back the mouthpiece to resume use.
Charging: Simply charge it by connecting it with a computer or a wall adapter via USB cable. Once plugged in, the charging indicator will be on. When it’s fully charged, the LED charging light will go out.
You can select the e-juice here.
It doesn’t come with 18650 lithium-battery.
We also provide Avatar quick charger here for 2A quick charge.
You also can buy the replacement Revenger MOD and NRG Mini tank in Our Store.
Note: If you buy the kit with batteiries we sell Bestfire 18650 Battery Rechargeable Battery 3.7V 2500mAh 35A Li-ion Battery. This kit requires two 18650 Batteries